• Python
• NumPy
• SciPy
• Matplotlib
• Excel Solver
Thomas Babu!
I'm aSpace Science
studentat
I still remember staying up late in Kasaragod, Kerala, to watch NASA’s Artemis I launch in November 2022.
Seeing the Space Launch System lift off from Kennedy Space Center and send Orion on its journey towards the Moon made space feel both impossibly distant and strangely tangible.
What began as an interest in launches gradually became a fascination.
In 2024, that curiosity led me to Melbourne to study Space Science at RMIT.
I have completed a lot of projects across orbital mechanics, geodesy, GIS, mission control operations and spectroscopy — this page serves as a portfolio of that work.
The project that still makes me grin is "Vertically Challenged".
PS — I am always on the look out for an Australian start-up or company where I can intern.
• Python
• NumPy
• SciPy
• Matplotlib
• Excel Solver
• ArcGIS Pro
• AUSPOS
Ac• AusCORS
• Illustrator
• GMAT
• ESA-DRAMA
• SOHO/LASCO
• VERTEX 70 FTIR
• OPUS 8.0.19
• OpenRocket
• SolidWorks
• Fusion 360
Melbourne, VIC

Designed and built a single-stage high-power rocket as part of a team project for the subject Rocket Science, taking on the roles of Design Engineer and Manufacturing Engineer. The project covered the full design lifecycle — from motor selection and stability analysis through to nose cone/fin design, 3D-printed part manufacturing, and flight simulation — culminating in a Preliminary Design Review, Critical Design Review, and Flight Readiness Review.
I selected an elliptical fin profile for the design, chosen for its low drag coefficient (Cd = 0.08) compared to alternative fin shapes, aimed at minimising aerodynamic drag during ascent. I paired this with a Von Kármán/Haack series nose cone (fineness ratio 4.76), selected for its favourable drag profile across the rocket's velocity range. I modelled the complete rocket — a 942 mm airframe with a G80T motor — in OpenRocket, producing full design and stability reports, and manufactured the nose cone, fins, and centering rings using PLA 3D printing.
I performed hand-calculated stability analysis (CP/CG margin), motor nomenclature interpretation, and descent/drift calculations (parachute descent velocity, time to ground, and crosswind drift), cross-referencing findings against peer-reviewed aerodynamic literature on nose cone drag.
Worked as a geospatial analyst on a simulated consulting engagement for the City of Melbourne, tasked with identifying where the public EV charging network leaves coverage gaps across the Melbourne CBD (Hoddle Grid) and recommending priority sites for new chargers based on pedestrian demand.
Compiled and processed multiple open datasets in ArcGIS Pro — including public EV charger locations (Open Charge Map), CBD boundary and land-use data, and pedestrian sensor activity data from the City of Melbourne's open data portal — projecting all layers to GDA2020 MGA Zone 55 and clipping them to the study area. Applied a 200 m walking-distance buffer (rather than the standard 400 m benchmark) around all existing chargers to expose accessibility gaps that a looser threshold would mask, using the Buffer and Erase tools to isolate underserved zones. Generated a pedestrian demand surface using Kernel Density estimation on sensor activity data, then visually overlaid the coverage-gap layer against the demand heatmap to identify locations where high pedestrian activity coincided with an absence of charging infrastructure.
Synthesised the analysis into a professional client-facing poster, including a full methodology flowchart, data source table, results maps, and actionable recommendations.
Findings: The analysis identified 38 existing public EV chargers across the CBD, with strong coverage in the central and eastern Hoddle Grid but significant gaps in the western and central-southern areas — notably around Queen Victoria Market, which emerged as the dominant pedestrian hotspot. Three priority sites were recommended where coverage gaps directly overlapped with high pedestrian density, along with recommendations to co-locate new chargers with existing car parks and to shift future analysis toward network-based (rather than Euclidean) walking catchments to account for barriers like the Yarra River and one-way streets.
Designed a follow-on satellite mission to NOAA's Polar Operational Environmental Satellites (POES) as part of a satellites and space debris assignment, covering orbit selection, collision risk assessment, and post-mission disposal compliance.
Using GMAT, selected and modelled a Sun-synchronous orbit (833 km altitude, 98.8° inclination) appropriate for continuous global weather and climate monitoring, generating a 3D orbit visualisation and 48-hour ground track to demonstrate near-global coverage (~14 passes per day). Assessed collision risk at this altitude using ESA's DRAMA tool, analysing impact flux versus impactor diameter to characterise the satellite's exposure to micrometeoroids and orbital debris across size regimes. Modelled the satellite's long-term orbital decay using DRAMA's OSCAR module, propagating perigee/apogee altitude over a 25-year period to test compliance with Australian post-mission disposal requirements, and proposed a disposal strategy (perigee lowering or drag sail augmentation) to achieve the required ≤25-year re-entry timeline
Findings:
The chosen 833 km Sun-synchronous orbit provides strong mission coverage but carries measurable debris risk — a near-certain annual exposure to micron-scale dust, a modest chance of millimetre-class impacts capable of damaging radiators or solar cells, and a low but mission-threatening risk of centimetre-class strikes. The OSCAR natural-decay analysis showed negligible orbital decay over 25 years at this altitude, meaning the satellite would remain in orbit well beyond the disposal compliance window without intervention — requiring an active end-of-mission disposal plan (e.g. lowering perigee to ~550 km or adding a drag sail) to meet Australian launch permit requirements.
Designed a visitor's guide map of Melbourne's sporting precinct — the Melbourne Cricket Ground (MCG) and surrounding Yarra Park — as a cartographic design project for the subject Mapping the World. The project involved producing a professional, publication-ready A4 map for visitors, built from a supplied base map and incorporating full cartographic conventions alongside supporting photography and text.
Designed and produced the final map in Adobe Illustrator, building a custom colour scheme with a clean legend, title block, and scale bar (1:10,000). Mapped key wayfinding information including tram, bus, and train stations, car parking, walking routes, and estimated walk times between transit points and key destinations (e.g. Jolimont Station to the MCG and Yarra Park). Complemented the cartographic output with photography and descriptive text panels on the MCG and Yarra Park, giving visitors both spatial and contextual information about the precinct.
Outcome:
The final product balanced cartographic accuracy (correct symbology, scale, legend, and source attribution to Vicmap/Esri/HERE/Garmin/USGS) with visitor-friendly design — clear wayfinding cues, walk-time annotations, and supporting imagery — resulting in a map that functions as both a navigational tool and an informational brochure for a major tourist/sporting destination.
Worked as part of a three-person team to develop a technical proposal, in the style of a client-facing quote to Geoscience Australia, for indirectly determining the ITRF2020 system reference points of two space geodetic instruments at the Mt Stromlo Observatory: a DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) beacon and a Satellite Laser Ranging (SLR) telescope — both of which have reference points that cannot be physically occupied or directly surveyed.
Designed and documented a complete computational workflow for indirectly determining the DORIS beacon's System Reference Point (SRP), defined as the intersection of the antenna's vertical axis and its painted ring. The process converts terrestrial survey observations (bearing, elevation angle, and slope distance) to accessible points on the ring into local East-North-Up displacement vectors, transforms these into ITRF2020 XYZ coordinates using the known coordinates of a nearby GNSS control point, and applies a 3D least-squares circle fit to estimate the ring's centre — adopted as the DORIS SRP. Implemented this process in a spreadsheet using Excel Solver to refine the circle-fit parameters by minimising the sum of squared residuals, applied to real sample survey data from the Mt Stromlo site.
Also researched and documented an analogous indirect process for determining the SLR telescope's Invariant Point (IVP) — the intersection of its azimuth and elevation rotation axes — based on published geodetic methodology, involving 3D circle-fitting of target traces recorded during telescope rotation about each axis, followed by best-fit line and axis-intersection computation.
Findings: The final DORIS SRP was computed in ITRF2020 XYZ coordinates from the fitted ring centre. Verification against all six observed ring points showed residuals below 10 mm with no systematic bias, and a fitted ring radius (~0.191 m) closely matching the nominal DORIS antenna ring radius (~0.2 m) — confirming the computational method converged on a physically realistic and internally consistent solution.
Ran the Solar Wind Desk in a simulated forecasting centre: identified an Earth-directed halo CME in SOHO/LASCO coronagraph imagery, then confirmed its arrival in L1 in-situ solar wind data.
A jump in speed and density with a sustained southward Bz gave the geomagnetic storm signature. Our desk forecast the disturbance against the NOAA Space Weather Scales.

Active member of the RMIT student chapter of the Royal Astronomical Society, engaging with a student community focused on astronomy and astrophysics — complementing coursework in Astrophysics and Cosmology as part of the Space Science degree.

Active member of RMIT's Aerospace Engineering Student Association, engaging with a student community focused on aerospace and space industry topics, events, and networking opportunities. Involvement reflects a broader interest in the Australian space and aerospace sector alongside formal Space Science studies.

Active member of RMIT's Geospatial Science Student Association, engaging with a student community focused on GIS, remote sensing, and geospatial technology — complementing coursework in Geospatial Techniques (GNSS, ArcGIS Pro, TIN surface modelling) undertaken as part of the Space Science degree.




